• If you're struggling to login because of the verification email not reaching you, don't worry it's just the forum settings applying the change slowly. I'll get in touch with those who are awaiting the verification email and sort your accounts out. I think new ones should go through fine now in most cases.

Feeds from ElectriciansForums.net

Post thread
Normal Threads
A
EF: Scantronic ion30 bell box
Scantronic ion30 bell box Customer has knocked a bell box off the wall and destroyed it. They would like it removed from the programming so that the alarm can be activated without accepting the fault. Can anyone recommend a solution? Scantronic ion30 bell box to Continue reading...
Replies
0
Views
37
AnchorSecurity
A
M
EF: Am2 test however I have 2391 inspection and testing
Am2 test however I have 2391 inspection and testing Hi there just after some advice Just done my AM2 and made a blunder on my test and inspection which I know I will fail .. however I have 2391 inspection and testing would this part of am2 still need to be done ?? Thanks in advance Am2 test...
Replies
0
Views
35
Mark Adamson
M
C
EF: LED light advice much needed please
LED light advice much needed please I have an autistic son who is into photography, I have been into it for 45 years and have a question I am hoping you can answer please. I took the attached image using a "light box" I built, A3 opaque top, 3 sides with wood 3" x 1/2" x 14", and one open...
Replies
0
Views
39
Cannik
C
D
EF: When electrics go wrong!!!
When electrics go wrong!!! Just setting up a new sticky thread that unlike the dodgy trade pics thread is focused on showing the result of failures in electrical installations IE - damage caused which may be due to various reasons. Please do not post pics of poor workmanship if there is...
Replies
0
Views
40
Darkwood
D
C
EF: What size kW
What size kW Hello, I'm a plumber by trade and I need to fit an electric shower, it's already got a power supply doesn't look man enough for a 8.5kW electric shower, i was hoping you could point me in the right direction to make compatible. What size kW to Continue reading...
Replies
0
Views
43
Caplumbing
C
D
EF: Cable schedules
Cable schedules Cable schedules. Can some body please explain what each digit on this type of info means? 1 x 1 x 4c is one cable with 4 cores 4 x 1 x 4c is 4 cables with 4 cores I think this is correct but what does the middle digit represent? Cable schedules to Continue reading...
Replies
0
Views
53
Demamine
D
T
EF: Can two AC sources be merged?
Can two AC sources be merged? I have a small camper. Input to the AC distribution panel normally comes from a 30A shore power source. I can also feed the distribution panel from an inverter powered by an LiFePO4 battery. The inverter output taps into the distribution panel on the same bus bars...
Replies
0
Views
56
TimeOutside
T
G
EF: 2nd Garage Board
2nd Garage Board Hi, Just a quick question on installing a second board for Solar PV in my garage. I have a 2 way board at the moment with RCD protection for lighting and sockets, supplied from the main house DB (20A 4.0mm cable). I have previously installed a separate 6.0mm cable from the...
Replies
0
Views
50
GarryT
G
R
EF: Is it enough to prove safe isolation on a circuit which is controlled by a PIR on a seperate circuit ?
Is it enough to prove safe isolation on a circuit which is controlled by a PIR on a seperate circuit ? Hi Guys currently doing my apprenticeship and looking for some external advice regarding safe isolation. Situation is a circuit supplying some external street bollard lights and 1 or 2 street...
Replies
0
Views
39
Rob678
R
A
EF: DIY - Looking for advice on a re-connecting a ceiling rose loop
DIY - Looking for advice on a re-connecting a ceiling rose loop Looking for advice on how to re-connect a ceiling rose loop connector. I am trying to achieve room 1 and room 2 lights to be independently on and off. This previously worked until i decided to try and change the fitting without...
Replies
0
Views
46
andy_baz
A
B
EF: Fluke 1653 fuse
Fluke 1653 fuse I have a fluke 1653 which gives me a fuse error, but only when voltage is present. Done some research but not found anyone with the same issue... just wondering if it’s time to retire the fluke as I know it’s getting on a bit now... just seeing if anyone’s had/ seen this...
Replies
0
Views
43
Brian246
B
S
EF: Do any one have the Connection details of L2200 JUMHO Signal Controller ( Navigation Panel)
Do any one have the Connection details of L2200 JUMHO Signal Controller ( Navigation Panel) Good Day to All of You, Do any one have the Connection details of L2200 JUMHO Signal Controller ( Navigation Panel) Thanks & Best Regards Do any one have the Connection details of L2200 JUMHO Signal...
Replies
0
Views
45
SUREJSREE
S
W
EF: Connect retic controller to Dol contractor
Connect retic controller to Dol contractor Hi, after some advice as my retired electrician father in law can’t figure it out. We purchased a house with a bore, I have attached the current setup in a picture. The dol contractor is always on so we have to use the isolator switch to turn off and...
Replies
0
Views
44
Wogboy112
W
B
EF: help what to do now? (electrics)
help what to do now? (electrics) so straight to the point these are the qualifications I did back in those times however, I did not do an nvq lvl 3 am2 an such because It was hard finding a apprenticeship or electrician or company to work for and it didn't help that I didn't have a car back...
Replies
0
Views
41
baza890
B
D
EF: ZS AT DB
ZS AT DB Hi When filling in an Schedule Of Test Results, the top left box asks for ZS at DB. On an installation with only one DB will the ZS at DB recorded as the same value as ZE. After performing a ZE test can you reconnect the Earthing conductor and test for ZS and use that value...
Replies
0
Views
43
Deleted member 138473
D

Latest Topics

Back
Top